Fiber Optic Slitter – FiberOptics24.eu

MSAT® 16 Series

Rene Allert — Fri, 08 Mar 2024 11:01:56 +0000

- Safe, compact & ergonomic design fits comfortably in hand for easy operation without risk of injury.
  16 unique diameter settings accommodate loose tubes ranging from 1 mm to 3 mm.
- Convenient built-in sizing channels quickly determine proper setting for a wide variety of loose tube cables.
- Patent-pending design features a self-aligning, easy-to-load buffer tube channel that supports & guides
  the tube through precision shaving operation.
- Rugged polymer construction is lightweight & durable.
- Spring-loaded design eliminates need to lock or clamp tool while in use.
- Fixed stainless steel blades require no adjustments and replace easily.

PRODUCT INSTRUCTION SHEET PDF

Compatibility

Buffer Tube Diameter	0.039″ – 0.118″ (1.0 – 3.0 mm)
Branded compatible cables	OFS EZ-Bend® 3.0 mm cable, Corning’s outdoor ALTOS® loose tube, Microduct MiniXtend® HD and MiniXtend® cable with binderless FastAccess® Technology, indoor/outdoor FREEDM® and LSZH® loose tube cables, PPC Semiflex 3 mm cable, and other similar style cables

The post MSAT® 16 Series appeared first on FiberOptics24.eu.

MB06 Series

Rene Allert — Tue, 05 Mar 2024 12:46:31 +0000

The compact Miller® MB06 is designed to perform slit and ring cuts on fiber optic cables,
buffer tubes, and jackets from 0.05″ to 0.25″ (1.2 to 6.4 mm) in diameter.
The tool features easily adjustable slit and ring blades. The MB06 has two ring cut
channels and a reversible V block that improves slitting performance to
accommodate the full diameter range.

Unique circular blade is less prone to “dig” into the cable versus other slit & ring tools
with angled blades, providing easier & more consistent operation for precise, reliable cuts
Blade operates well in both forward & reverse without dragging or stalling
Equipped with spring-loaded V-shaped jaw that provides stable, precision slitting & ringing
performance
Interchangeable V-block accommodates cable diameters from 0.05″ to 0.25″ (1.2 to 6.4 mm);
custom sizing blocks available
Safe, compact & ergonomic design fits comfortably in hand for easy operation without risk of
injury
Compact size & lightweight compared to the competition
Easily adjustable blade depth prevents fiber damage

PRODUCT INSTRUCTION SHEET PDF

Cable Access	Mid-Span, End
Min. Cable Outer Diameter	1,2 mm
Max. Cable Outer Diameter	6,4 mm

The post MB06 Series appeared first on FiberOptics24.eu.

Buffer Tube Scorers

Rene Allert — Tue, 05 Mar 2024 10:48:07 +0000

One-step precision fiber buffer tube scoring tool
Factory-set, hardened carbon steel blade requires no adjustments
Body comprised of a resilient acetal polymer to ensure longevity
Color-coded to for easy identification out in the field

FTS INSTRUCTION SHEET PDF.

FTS-005 INSTRUCTION SHEET PDF.

The post Buffer Tube Scorers appeared first on FiberOptics24.eu.

MS-316: Mid Span Slit & Ring Tool (2.9 mm-6.8 mm), Jonard

Rene Allert — Mon, 21 Sep 2020 08:40:24 +0000

The patented MS-316 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in outer jackets and buffer tubes.
Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature
in the tool to make it even more versatile.

All of our MS Series Mid Span Tools are patented for their unique design and functionality. Our MS-426 won the 2019 Cabling Installation
& Maintenance Gold award for innovation and our MS-6 won the same prestigious award in 2018!

Groove Sizes: 2.9-3.6 mm | 3.6-4.4 mm | 4.4-5.2 mm | 5.2-6.0 mm | 6.0-6.8 mm

PRODUCT DATA SHEET PDF.

The post MS-316: Mid Span Slit & Ring Tool (2.9 mm-6.8 mm), Jonard appeared first on FiberOptics24.eu.

RCS-25: Ratcheting Cable Slitter, Jonard

Rene Allert — Wed, 10 Apr 2019 13:00:19 +0000

Cut Type	Slit, Ring
Weight	0.4 lbs (181.43g)
Length	Open 8-1/4″ (209.55 mm), Closed 6″ (152.4 mm)

The post RCS-25: Ratcheting Cable Slitter, Jonard appeared first on FiberOptics24.eu.

RST-8514: Riser & Micro Duct Slitter, Jonard

Rene Allert — Wed, 10 Apr 2019 11:11:04 +0000

JONARD

Easy to use:

Press the tool against the cable to be accessed.
Grip the tool and the cable firmly in one hand and pull.

The post RST-8514: Riser & Micro Duct Slitter, Jonard appeared first on FiberOptics24.eu.

CSR-1575: Cable Slit & Ring Tool, Jonard

Rene Allert — Wed, 10 Apr 2019 10:59:08 +0000

Simple to use:

Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the “+” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.

The post CSR-1575: Cable Slit & Ring Tool, Jonard appeared first on FiberOptics24.eu.

MS-26: Large Mid Span Slitter, Jonard

Rene Allert — Wed, 10 Apr 2019 10:00:12 +0000

Groove Sizes:

2.9 – 3.6 mm
3.6 – 4.4 mm
4.4 – 5.2 mm
5.2 – 6.0 mm
6.0 – 6.8 mm

Note: works with OFS EZ-Bend^® 3.0 and 4.8mm drop cables
Easy to use:

Select the correct groove. Each groove is marked with the recommended fiber size.
Place the fiber in the groove to be used. The arrow on the top of the MS-26 indicates blade location and pulling direction.
Close the tool making sure the lock is engaged and pull.

The post MS-26: Large Mid Span Slitter, Jonard appeared first on FiberOptics24.eu.

MS-6: Mid Span Slitter, Jonard

Rene Allert — Wed, 10 Apr 2019 09:54:01 +0000

Groove Sizes:

1.2 – 1.5 mm
1.5 – 1.8 mm
1.8 – 2.1 mm
2.1 – 2.5 mm
2.5 – 2.9 mm
2.9 – 3.3 mm

Easy to use:

Select the correct groove. Each groove is marked with the recommended fiber size
Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
Close the tool making sure lock is engaged and pull

Note:

This tool is specified for use on the OFS EZ-Bend^® 3.0mm cable.
Works on Corning’s outdoor ALTOS^® loose tube, Microduct MiniXtend^® HD and MiniXtend^® cable with Binderless^® FastAccess^® Techonology, and on their indoor/outdoor FREEDM^® and LSZH^® loose tube cables having 1.4, 1.7, 2.5mm buffer tubes.
Works great on PPC semiflex 3mm.

The post MS-6: Mid Span Slitter, Jonard appeared first on FiberOptics24.eu.

FOD-2000: Fiber Optic Drop Cable Slitters, Jonard

Rene Allert — Wed, 10 Apr 2019 09:30:07 +0000

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.

The post FOD-2000: Fiber Optic Drop Cable Slitters, Jonard appeared first on FiberOptics24.eu.