MPL6-33 is a separate and very small size microduct microsonde. Especially intended to be used with the Vesala CL43 Compact PRODUCT INFO SHEET PDF.
Locator, also other cable tracers and pipe locators using the 33kHz tracing frequency. This transmitter microsonde is especially
suitable for tracing blockages of optical cable’s microducts as well as tracing other small non-conductive pipes and sewers.
MPL6-33’s diameter is only 6.4mm so it fits into the standard 12/8mm tubes.SONDE SPETCIFICATIONS PDF.

MPL6-33 construction includes the transmitter unit and battery compartment connected together with a semi-rigid
middle part. The shape of the transmitter and the unique construction help the sonde pass tube curves and joints more easily.USER MANUAL PDF.

Working with MPL6-33

Microsonde turns on and starts sending tracing signal when a battery is inserted and the battery compartment is turned to the
middle part. The sonde is attached to the tip of a push rod by its M5 female thread. Which are located at the end of the battery
compartment. Alternatively the sonde can be taped to the side of the push rod to reduce risk of damage. Sonde can also be
attached to the tip of an optical cable. After which the sonde is jetted into a microduct together with the cable.

If there is a blockage in the microduct. Firstly, location can be roughly estimated using the jetted cable or rod length and
cable & duct maps. After that, the exact location of MPL6-33 is traced in the area above ground with a cable tracer
receiver. In conclusion, knowing the exact spot of a blockage considerably saves time and reduces unnecessary digging costs.

Other usage and batteries

Both the transmitter unit and the battery compartment are watertight enabling underwater use. There is a blinking light at
the tip of the transmitter indicating transmitter operation. Lithium battery gives approx. 9 hours total usage time depending
on ambient temperature.

MPL6-33 diameter is 6.4mm and length with mounted battery compartment 84mm.

Transmitter signa

32.768 kHz continuous sinusoidal signal.

If you need also Shock Absorbers please check compatibly here and make a Request Qoute

Made in Finland

The post MICROSONDE MPL6-33 (6.4 MM, 33 KHZ) appeared first on FiberOptics24.eu.