Cable Tracer TM30

Description

Vesala Cable tracer TM30

Cable tracer TM30 is a cable & wire tracer equipped with monitoring and measuring properties.
It can be used also at mains environment, so it is well suitable for both telecom and electric
installation work as well as renovation and fault spotting work and much more.
With TM30 it is also possible to trace short length wires or single wires, which are usually hard to find.

Transmitter TMT30
TMT30 has three very easy to use operating modes:

• In the Trace mode device transmits a signal to be traced with the receiver. TMT30 withstands
  voltages up to 400V, so it can be well plugged into e.g. a mains wall socket. Device also displays the
  voltage at the outputs and the feeding signal current to the target.
• In the Meter mode, TMT30 operates as a voltage and frequency meter.
• With a special DSLAM test TMT30 can be used to check whether a CO side ADSL modem is present
  on a seemingly unused line.

Receiver TMR30
TMR30 is very versatile:

• It has three Trace modes to be used to trace and track signals generated by the transmitter on PRODUCT INFO SHEET PDF.
  open wires or cables. Cables can be traced from close ranges up to several metre distance.
• The three Monitor modes can be used to monitor, or listen, signals over wires or terminals
  without galvanic contact to them.
• With the Powerline monitor mode TMR30 can be used without the transmitter to reveal live USER MANUAL PDF.
  wires and wall sockets and which side is phase.
• High frequency signals, such as broadband wires and terminals, can be monitored with
  the High Freq mode.
• With the Audio freq mode audio frequencies can be listened right at the surface of wires.

TMR30 has fixed internal antennas so it is very compact and easy to use. The LED bar display together
with the audible signals reveal the traced target while tracing. Furthermore TMR30 has an optional
LED work light pointingto the traced spot.