SONDE PL18-05M12F (18 MM, 512 HZ)

Description

SONDE PL18-05M12F (18 MM, 512 HZ)

PL18-05 is a low frequency (512Hz) pipe transmitter sonde, which enables tracing of underground
cast iron ducts and their blockages.Also stainless steel ducts commonly used in industry can be
followed and checked with PL18-05.

PL18-05 powers on when the battery compartment is turned to the transmitter section. Red power-on
LED at the tip of the sonde indicates operation. If LED goes off, battery is weak. Sonde is
attached to the push rod (snake) with the M12 threaded sleeve or with tape. After that the sonde
is pushed into the target duct using the push rod.

All PL18-series sondes can be mounted to a variety of push rods. Standard mounting is for rods
with M12 male thread. With the PL18-FM flexible mounting accessory also M6 rods can be used and
the PL-MSA accessory enables M5 and M10 rods.

To avoid loosing signal e.g. at corners the sonde is traced with a cable tracer receiver along as
it moves ahead. If sonde hits an obstacle or blockage, it’s possible to define the location and
depth very accurately, which reduces unnecessary digging.

PL18-05 diameter is 18.2mm and length with stardard battery compartment is 110mm. Transmitted
signal is continuous 512Hz.

This Vesala product is made in Finland.

SOND BROCHURE PDF.

 

 

SONDES SPECIFICATION PDF.