No products in the cart.
DRILL POINT LOCATOR PK2
- For pinpointing drill holes through up to 150cm concrete walls and floors
- For determining required drill depth
- For detecting metal and electric obstacles
COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
COMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
SA05 – ROD ANTENNA FOR COMPACT LOCATOR
SA05 – ROD ANTENNA FOR CL43 COMPACT LOCATOR, 512 HZ
SA43 – ROD ANTENNA FOR COMPACT LOCATOR
SA43 – ROD ANTENNA FOR CL43 COMPACT LOCATOR, 10 KHZ AND 33 KHZ
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
Availability:
€12.90 – €33.90Out of stock
Out of stock
Select options This product has multiple variants. The options may be chosen on the product page
EPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
DRILL POINT LOCATOR PK2
- For pinpointing drill holes through up to 150cm concrete walls and floors
- For determining required drill depth
- For detecting metal and electric obstacles
COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
Availability:
Available on backorder
Vesala
€670.50 (inc.Vat€818.01 )Available on backorder
Add to cartCOMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
SA43 – ROD ANTENNA FOR COMPACT LOCATOR
SA43 – ROD ANTENNA FOR CL43 COMPACT LOCATOR, 10 KHZ AND 33 KHZ
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
Availability:
€12.90 – €33.90Out of stock
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageEPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
DRILL POINT LOCATOR PK2
- For pinpointing drill holes through up to 150cm concrete walls and floors
- For determining required drill depth
- For detecting metal and electric obstacles
COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
COMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
SA05 – ROD ANTENNA FOR COMPACT LOCATOR
SA05 – ROD ANTENNA FOR CL43 COMPACT LOCATOR, 512 HZ
SA43 – ROD ANTENNA FOR COMPACT LOCATOR
SA43 – ROD ANTENNA FOR CL43 COMPACT LOCATOR, 10 KHZ AND 33 KHZ
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
€12.90 – €33.90
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageEPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
€12.90 – €33.90Out of stock
Punchdown Tool Blades
Select options This product has multiple variants. The options may be chosen on the product page
