No products in the cart.
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
FL-2000: LED Flashlight With Zoom Lens
- Brightness is 120 lumens Led lamp
- beam is adjustable
- With zoom lens
- powered by a single AA alkaline battery
KSS-1: Scissor and Knife Sharpener
- Diamond-polished high grade tungsten-carbide steel blades will restore the edges of scissors or knives with only 3-4 strokes
- Safety guard protects your fingers during sharpening
- Lightweight and compact design for easy portability
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
DW-90: Dry Wipes for Cleaning Fiber
JONARD
- Made from a lint-free polyster material, suitable for cleaning fiber connectors and sensitive electronic components
- Packaged in a durable plastic mini jar to prevent contamination
- Contains 90 lint-free wipes per package
FCF-3: Nonflammable Fiber Cleaning Fluid
JONARD
- Completely removes dust, dirt, finer prints, and moisture from surfaces
- Superior cleaning performance and evaporates quicker than IPA
- Effective at dissipating electrostatic charges
- Top hole can be used to wet Stickler CleanStixx™
- Spray can is hernetically sealed to prevent cross contamination
- Contains enough fluid for more than 650 cleanings per can
FD-220: Fluid Dispenser for Fiber Cleaning 220ml
JONARD
- Holds up to 220 ml of isopropyl alcohol or other cleaning fluids
- Twist-lock pump can be locked/unlocked with a simple twist
- Spill-proof lid holds fluid securely, preventing waste from spills and leaks
- Easy-to-use pump delivers a controllable amount of fluid with each press
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
Availability:
€12.90 – €33.90Out of stock
Out of stock
Select options This product has multiple variants. The options may be chosen on the product page
EPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
Replacement Blade for MDC-28 Micro Duct Cutter
This is the replacement blade pack for the MDC-28 Micro Duct Cutter
and includes 2 replacement blades.
MDC-28: Micro Duct Tubing Cutter up to 28mm, Jonard
Jonard
- Triangular blade provides square and straight cuts by holding the tubing in place
- Spring-loaded jaws make it quick and easy to use
- Carbon steel blade with black oxide finish is durable and easily replaceable
- Safety lock keeps tool close when not in use
- Molded ribbed grips for comfort and secure holding
Termination box DW-3 12xSC
-
- Termination box for outdoor use, IP65.
- It is suitable for wall-mounting installation.
- Size: 258×186×61 mm.
- The maximum capacity is 12 fibers for LC quad adapters,
and 12 fibers for duplex SC adapters.
Termination box DW-9 2xSC
- Termination box for outdoor use.
- Cable enter from bottom.
- Box and key design is easy for operation wit complete function of small size.
- It could be used for adaptors such as SC simplex (up to 2 pcs) or LC duplex (up to 2 pcs).
- Protect Level: IP65
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
MINISONDE MPL4-33 (4.6 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
MINISONDE MPL9-33M6F (9 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
Availability:
€487.00In Stock
In Stock
Select options This product has multiple variants. The options may be chosen on the product page
MICROSONDE MPL7-33M6F (7.5 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
FCT-100: Fiber Connector Tool, Jonard
The FCT-100 is the perfect tool for inserting and extracting fiber connectors in high density patch panels
Tool is designed to work with LC, SC simplex and duplex connectors as well as with MU, MT-RJ and other similar type connectors.
The spring-loaded tool and comfortable grips allow for easy operation.
FS-616: Fiber Scribe, Jonard
JONARD
- 6mm wide Carbide Blade
- 35 degree Bevel Edge
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
FL-2000: LED Flashlight With Zoom Lens
- Brightness is 120 lumens Led lamp
- beam is adjustable
- With zoom lens
- powered by a single AA alkaline battery
KSS-1: Scissor and Knife Sharpener
- Diamond-polished high grade tungsten-carbide steel blades will restore the edges of scissors or knives with only 3-4 strokes
- Safety guard protects your fingers during sharpening
- Lightweight and compact design for easy portability
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
DW-90: Dry Wipes for Cleaning Fiber
JONARD
- Made from a lint-free polyster material, suitable for cleaning fiber connectors and sensitive electronic components
- Packaged in a durable plastic mini jar to prevent contamination
- Contains 90 lint-free wipes per package
FCF-3: Nonflammable Fiber Cleaning Fluid
JONARD
- Completely removes dust, dirt, finer prints, and moisture from surfaces
- Superior cleaning performance and evaporates quicker than IPA
- Effective at dissipating electrostatic charges
- Top hole can be used to wet Stickler CleanStixx™
- Spray can is hernetically sealed to prevent cross contamination
- Contains enough fluid for more than 650 cleanings per can
FD-220: Fluid Dispenser for Fiber Cleaning 220ml
JONARD
- Holds up to 220 ml of isopropyl alcohol or other cleaning fluids
- Twist-lock pump can be locked/unlocked with a simple twist
- Spill-proof lid holds fluid securely, preventing waste from spills and leaks
- Easy-to-use pump delivers a controllable amount of fluid with each press
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
Availability:
€12.90 – €33.90Out of stock
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageEPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
Replacement Blade for MDC-28 Micro Duct Cutter
This is the replacement blade pack for the MDC-28 Micro Duct Cutter
and includes 2 replacement blades.
MDC-28: Micro Duct Tubing Cutter up to 28mm, Jonard
Jonard
- Triangular blade provides square and straight cuts by holding the tubing in place
- Spring-loaded jaws make it quick and easy to use
- Carbon steel blade with black oxide finish is durable and easily replaceable
- Safety lock keeps tool close when not in use
- Molded ribbed grips for comfort and secure holding
Termination box DW-3 12xSC
-
- Termination box for outdoor use, IP65.
- It is suitable for wall-mounting installation.
- Size: 258×186×61 mm.
- The maximum capacity is 12 fibers for LC quad adapters,
and 12 fibers for duplex SC adapters.
Termination box DW-9 2xSC
- Termination box for outdoor use.
- Cable enter from bottom.
- Box and key design is easy for operation wit complete function of small size.
- It could be used for adaptors such as SC simplex (up to 2 pcs) or LC duplex (up to 2 pcs).
- Protect Level: IP65
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
MINISONDE MPL4-33 (4.6 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
MINISONDE MPL9-33M6F (9 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
Availability:
In Stock
Vesala
€487.00In Stock
Select options This product has multiple variants. The options may be chosen on the product pageMICROSONDE MPL7-33M6F (7.5 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
Availability:
Available on backorder
Vesala
€499.00 (inc.Vat€608.78 )Available on backorder
Add to cartFCT-100: Fiber Connector Tool, Jonard
The FCT-100 is the perfect tool for inserting and extracting fiber connectors in high density patch panels
Tool is designed to work with LC, SC simplex and duplex connectors as well as with MU, MT-RJ and other similar type connectors.
The spring-loaded tool and comfortable grips allow for easy operation.
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
TETP-900: Multi-Function Cable Tester Tone & Probe Kit
Kit includes:
- TET-700 Multi-Function Cable Tester & Toner
- TEP-200 Tone Tracing Probe
- TET-6 Accessory Kit for TET-700
- (2) 9V batteries
WSC-826: Wire Stripper and Crimper (8 – 26 AWG)
- Great for stripping Romex 12 and 14 AWG cables and most stranded or solid conductors
- Tool has a wire cutter and crimper for non-insulated terminals
- Handy adjustable wire stop ensures precise and consistent results
- Special micro adjustment knob allows the tool to work on cables as small as 30 AWG and as large as 8 AWG
- Crimper portion of the tool works on non-insulated terminals from 10 to 22 AWG and there is a separate crimper for crimping 7 mm to 8 mm ignition wires
FL-2000: LED Flashlight With Zoom Lens
- Brightness is 120 lumens Led lamp
- beam is adjustable
- With zoom lens
- powered by a single AA alkaline battery
KSS-1: Scissor and Knife Sharpener
- Diamond-polished high grade tungsten-carbide steel blades will restore the edges of scissors or knives with only 3-4 strokes
- Safety guard protects your fingers during sharpening
- Lightweight and compact design for easy portability
UST-205: RG59/6 & RG7/11 Replacement Blade Cartridge for UST Series
JONARD
- Provides a 2-level strip for F, BNC, and RCA connector termination
- High carbon steel blades last for over 5,000 strips
- Cartridge is reversible for ambidextrous use
- Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Model: RG59, RG6, RG7, RG11 No Cable Stop
UST-500: Universal Cable Stripping Tool for COAX, Network, and Telephone Cables
JONARD
- Included blade cartridge (UST-205) provides a 2-level strip on RG59, RG6, RG7, and RG11 COAX Cables for F, BNC, and RCA connector termination
- High carbon steel blades last over 5,000 strips on each side
- Cartridge is reversible for ambidextrous use
- Adjustable stripping hole is used to strip CAT3/4/5E/6/6A PVC and Plenum network cables
- Cutter is included to cut all types of cables
- Separate stripping hole included for stripping Flat Cable & 4P/6P style cable
- Large finger loop provides smooth rotation during use
- Stripping action removes 1/4″ of jacket and 5/16” of shield and dielectric, which exposes the center conductor
Cable Type
Cable Type: RG59, RG6, RG7, RG11 No Stop
DW-90: Dry Wipes for Cleaning Fiber
JONARD
- Made from a lint-free polyster material, suitable for cleaning fiber connectors and sensitive electronic components
- Packaged in a durable plastic mini jar to prevent contamination
- Contains 90 lint-free wipes per package
FCF-3: Nonflammable Fiber Cleaning Fluid
JONARD
- Completely removes dust, dirt, finer prints, and moisture from surfaces
- Superior cleaning performance and evaporates quicker than IPA
- Effective at dissipating electrostatic charges
- Top hole can be used to wet Stickler CleanStixx™
- Spray can is hernetically sealed to prevent cross contamination
- Contains enough fluid for more than 650 cleanings per can
FD-220: Fluid Dispenser for Fiber Cleaning 220ml
JONARD
- Holds up to 220 ml of isopropyl alcohol or other cleaning fluids
- Twist-lock pump can be locked/unlocked with a simple twist
- Spill-proof lid holds fluid securely, preventing waste from spills and leaks
- Easy-to-use pump delivers a controllable amount of fluid with each press
VT-1000: Non-Contact Voltage Tester 90 to 1000VAC
JONARD
- Non-contact voltage detection from 90-1000 VAC
- Tests wires and cables through insulation as well
- CAT IV 1000V rating for added operation and protection
- LED light and beep sound to indicate that voltage is detected
- Optional silent mode for use in quiet areas
- Compact and lightweight design with built-in pocket clip allows you to carry it on the go
- Automatically shuts off after 3 minutes to preserve battery life
- Powered by (2) AAA batteries (included)
MCT-468: Modular Cable Tester for RJ45, RJ12, RJ11 Cables
JONARD
- Tests RJ45, RJ12, and RJ11 terminated cables with ease
- Tests for opens, shorts, and miswiring
- Full LED indication lights on both main and remote unit
- Automatically tests when switched on
- Can slowdown testing procedure using “S” switch to better see each test
Includes: Nylon carrying case and 9V battery (for use)
Punchdown Tool Blades
JONARD
All Jonard Punchdown Blades are compatible with all industry standard twist and lock style punchdown tools. Made of hardened alloy steel and nickel plated.
Punchdown Tool sold separately. Punchdown Tool
€12.90 – €33.90
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageEPD-914: Punchdown Tool without Blade
JONARD
- Hi/Lo impact settings (Hi: 40 lb / 178 N, Lo: 30 lb / 133 N)
- Combination Hook/Spudger stored in the chassis
- Color coded body is half yellow (cut side) and half blue for ease of use
- Enlarged blade storage compartment for easy storage
- Tested up to 100,000 cycles at high impact setting, ensuring long life during use
- Compatible with all our EPB-series blades and other similar brands (sold separately)
- Lifetime Warranty
Blades sold separately. EPB-series blades
CST-1i: Cyclops Wire Stripper
JONARD
- Strips insulation off of cables that are 1/8” – 3/8” (3.2mm – 9.6mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
UC-864: Modular 6-in-1 Crimping Tool
JONARD
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables 28-22 AWG (0.32 – 0.64 mm diameter)
- 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Dual-component ergonomic cushion grip handles for greater comfort
RJ45-550: CAT5e Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ-45-5100: RJ45 CAT5e Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT5/CAT5e cables
RJ45-650: RJ45 CAT6 Pass-Through Connectors (Pack of 50)
This product comes in a pack of 50 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
RJ45-6100: RJ45 CAT6 Pass-Through Connectors (Pack of 100)
This product comes in a pack of 100 connectors.
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you will not have to measure and cut the wires before
termination, which can easily lead to having a poor connection and signal loss - Pass-through plugs let you make Ethernet cables in custom lengths
- Works with most crimper tool models
- Clear housing allows the operator to see the wire pairs easily
- Gold plating on contact surfaces enhances signal quality
- Compatible with most RJ45 Crimping tools and 24 AWG cable
- Works with both solid and stranded CAT6/CAT6a cables
Replacement Blade for MDC-28 Micro Duct Cutter
This is the replacement blade pack for the MDC-28 Micro Duct Cutter
and includes 2 replacement blades.
MDC-28: Micro Duct Tubing Cutter up to 28mm, Jonard
Jonard
- Triangular blade provides square and straight cuts by holding the tubing in place
- Spring-loaded jaws make it quick and easy to use
- Carbon steel blade with black oxide finish is durable and easily replaceable
- Safety lock keeps tool close when not in use
- Molded ribbed grips for comfort and secure holding
Termination box DW-3 12xSC
-
- Termination box for outdoor use, IP65.
- It is suitable for wall-mounting installation.
- Size: 258×186×61 mm.
- The maximum capacity is 12 fibers for LC quad adapters,
and 12 fibers for duplex SC adapters.
Termination box DW-9 2xSC
- Termination box for outdoor use.
- Cable enter from bottom.
- Box and key design is easy for operation wit complete function of small size.
- It could be used for adaptors such as SC simplex (up to 2 pcs) or LC duplex (up to 2 pcs).
- Protect Level: IP65
ES-1964: Electrician’s Scissors, Jonard
JONARD
- For heavy duty use
- Made of chrome vanadium steel
- Blade is serrated
MINISONDE MPL4-33 (4.6 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
MINISONDE MPL9-33M6F (9 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
€487.00
In Stock
Select options This product has multiple variants. The options may be chosen on the product pageMICROSONDE MPL7-33M6F (7.5 MM, 33 KHZ)
VESALA
- For tracing ducts, pipes and sewers and their blockages
- Smallest in the market: Diameters starting from 4.6mm
- Transmitting frequencies 33kHz and 512Hz
- For telecom and electric installation, excavation etc.
FCT-100: Fiber Connector Tool, Jonard
The FCT-100 is the perfect tool for inserting and extracting fiber connectors in high density patch panels
Tool is designed to work with LC, SC simplex and duplex connectors as well as with MU, MT-RJ and other similar type connectors.
The spring-loaded tool and comfortable grips allow for easy operation.
FS-616: Fiber Scribe, Jonard
JONARD
- 6mm wide Carbide Blade
- 35 degree Bevel Edge
RCS-25: Ratcheting Cable Slitter, Jonard
JONARD
Features:
- Now with fixed jaws for better gripping and easier ratcheting!
- Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm.
- Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application.
- 10/20/30mm scaled on tool for slitting length reference.
€12.90 – €33.90Out of stock
Punchdown Tool Blades
Select options This product has multiple variants. The options may be chosen on the product page
€487.00In Stock
MINISONDE MPL9-33M6F (9 MM, 33 KHZ)
Select options This product has multiple variants. The options may be chosen on the product page
