No products in the cart.
PSI-15: QuickSleever™
- Conical fiber feed surface guides fiber directly to protection sleeve.
- Holds up to 15 protection sleeves.
- Sleeve is loaded and removed, another automatically falls into place.
- Compact and lightweight design.
- Remember to sleeve it before you cleave it!
- Please see our application note here detailing how to use this tool.
MS-316: Mid Span Slit & Ring Tool (2.9 mm-6.8 mm), Jonard
JONARD
- Consists of 5 precision slitting grooves and 5 precision ring grooves ranging in size from 2.9 mm to 6.8 mm
- One side of the tool performs radial/ring cuts and the other side slits the cable (longitudinal cut)
- Compact design weighing less only 74 g with included tethering hole makes it perfect to use in tight spaces or on the go
- Indicator line on top of the unit indicates the position of the blade for accurate slitting and ringing
- Replacement blade set available, part number: MS-316RB
- Blades last for 5,000 slits/cuts
Termination box 4xSC IP55
-
- Termination box for indoor/outdoor use, IP55.
- It is suitable for wall-mounting installation.
- Size: 210×135×40mm.
- The maximum capacity is 4 fibers.
- Frame for 4 SC simplex or LC duplex adapters.
COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
FW-50: Wet Wipes for Cleaning Fiber (Pack of 50)
JONARD
- Nonabrasive residue-free solvent cleans efficiently and evaporates quickly
- Compatible with most plastics, glass, and metals
- Contains (50) fiber wipes
Quantity
Quantity: 50
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
COMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
CSR-1575: Cable Slit & Ring Tool, Jonard
JONARD
- The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter.
- The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.
JIC-125: Fiber Optic Stripper, Jonard
JONARD
- The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber.
- Preset at the factory so no adjustments are necessary.
- Unique design prevents nicks or scratches on the optical fiber plus blades are ground and hardened for long life. Yellow plastic dipped handles
CST-1900: Round Cable Stripper, Jonard
JONARD
- Jonard Round Cable Stripper for end stripping, midspan cuts, and circular for jacket removal
- Cuts non-armoured cable diameters 3/16″ to 1-1/8″ (4.5-29 mm)
JIC-375: Three Hole Fiber Optic Stripper, Jonard
JONARD
- Easy to use
- Safe to use
- Ergonomical and comfortable
MS-326: Micro Duct Fiber Cable Slit and Ring Tool, Jonard
JONARD
- Micro duct fiber cable slit and ring tool.
- MS-326 will also slit open thin wall buffer tubes.
- Consists of 5 precision slitting grooves and 5 ring grooves.
MDC-14: Micro Duct Tubing Cutter up to 14mm, Jonard
Jonard
- Cuts are clean and straight.
- Maximumduct diameter 14mm (9/16”).
- TPR (Thermoplastic Rubber) grips.
- Heat treated stainless steel blade.
Splice Protector Sleeve 61mm
Sold in complete packs of 100 pcs.
Sumitomo FC-6RS-C Cleaver
FC-6R series
Simple, Precise, Long life
- Newly launched FC-6R series with automatic blade rotation.
- The FC-6R series can make 60,000 cleaves. Manual blade rotation and blade height adjustment are not necessary.
- Fibre offcuts are automatically stored in the large capacity offcut collector.
- User selectable blade rotation.
Can be sold only to Estonia
Price range: €4.80 through €12.90
Select options
This product has multiple variants. The options may be chosen on the product page
Price range: €5.40 through €9.00
Select options
This product has multiple variants. The options may be chosen on the product page
Microduct Cutter LDK19501/03
HEXATRONIC
OPTIPOP-R Reel Cleaner
NTT-AT
ATC-RE-02 NTT-AT (SC, MU, SC2, LC, FC, ST)
- Efficient and easy to use
- Delivers consistently high quality cleaning performance
- Lightweight and safe to use
- Anti-static resin is used
Adapter spx SC-MM Ceramic
FIBEROPTICS24, SENKO
FO 103-S Series
103-S Series
1 Hole Fiber Optic Stripper
Compact, single-hole design for efficient fiber buffer coat stripping.
CFS-3 Series
3 Hole Fiber Optic Stripper
Compact, three-hole design for efficient stripping.
MSAT® 16 Series
16-Channel Mid-Span Fiber Access Tool
Designed to easily size and access fibers in loose tube cables ranging from
1 to 3 mm diameters in mid-span applications.
MB06 Series
Adjustable Slit & Ring Tool
Designed to perform slit and ring cuts on fiber optic cables, buffer tubes, and jackets from 0.05″ to 0.25″ (1.2 to 6.4 mm) in diameter.
Buffer Tube Scorers
One-step precision fiber buffer tube scoring tool.
€18.75
Select options
This product has multiple variants. The options may be chosen on the product page
PSI-15: QuickSleever™
- Conical fiber feed surface guides fiber directly to protection sleeve.
- Holds up to 15 protection sleeves.
- Sleeve is loaded and removed, another automatically falls into place.
- Compact and lightweight design.
- Remember to sleeve it before you cleave it!
- Please see our application note here detailing how to use this tool.
MS-316: Mid Span Slit & Ring Tool (2.9 mm-6.8 mm), Jonard
JONARD
- Consists of 5 precision slitting grooves and 5 precision ring grooves ranging in size from 2.9 mm to 6.8 mm
- One side of the tool performs radial/ring cuts and the other side slits the cable (longitudinal cut)
- Compact design weighing less only 74 g with included tethering hole makes it perfect to use in tight spaces or on the go
- Indicator line on top of the unit indicates the position of the blade for accurate slitting and ringing
- Replacement blade set available, part number: MS-316RB
- Blades last for 5,000 slits/cuts
Termination box 4xSC IP55
-
- Termination box for indoor/outdoor use, IP55.
- It is suitable for wall-mounting installation.
- Size: 210×135×40mm.
- The maximum capacity is 4 fibers.
- Frame for 4 SC simplex or LC duplex adapters.
FO Panel 19″ 1U 200mm with self
SKU: 2795069COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
FW-50: Wet Wipes for Cleaning Fiber (Pack of 50)
JONARD
- Nonabrasive residue-free solvent cleans efficiently and evaporates quickly
- Compatible with most plastics, glass, and metals
- Contains (50) fiber wipes
Quantity
Quantity: 50
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
COMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
CSR-1575: Cable Slit & Ring Tool, Jonard
JONARD
- The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter.
- The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.
JIC-125: Fiber Optic Stripper, Jonard
JONARD
- The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber.
- Preset at the factory so no adjustments are necessary.
- Unique design prevents nicks or scratches on the optical fiber plus blades are ground and hardened for long life. Yellow plastic dipped handles
CST-1900: Round Cable Stripper, Jonard
JONARD
- Jonard Round Cable Stripper for end stripping, midspan cuts, and circular for jacket removal
- Cuts non-armoured cable diameters 3/16″ to 1-1/8″ (4.5-29 mm)
JIC-375: Three Hole Fiber Optic Stripper, Jonard
JONARD
- Easy to use
- Safe to use
- Ergonomical and comfortable
MS-326: Micro Duct Fiber Cable Slit and Ring Tool, Jonard
JONARD
- Micro duct fiber cable slit and ring tool.
- MS-326 will also slit open thin wall buffer tubes.
- Consists of 5 precision slitting grooves and 5 ring grooves.
MDC-14: Micro Duct Tubing Cutter up to 14mm, Jonard
Jonard
- Cuts are clean and straight.
- Maximumduct diameter 14mm (9/16”).
- TPR (Thermoplastic Rubber) grips.
- Heat treated stainless steel blade.
Sumitomo FC-6RS-C Cleaver
FC-6R series
Simple, Precise, Long life
- Newly launched FC-6R series with automatic blade rotation.
- The FC-6R series can make 60,000 cleaves. Manual blade rotation and blade height adjustment are not necessary.
- Fibre offcuts are automatically stored in the large capacity offcut collector.
- User selectable blade rotation.
Can be sold only to Estonia
Price range: €4.80 through €12.90
Select options
This product has multiple variants. The options may be chosen on the product page
Price range: €5.40 through €9.00
Select options
This product has multiple variants. The options may be chosen on the product page
FO Panel front plate 1U 24xSC-Simplex
SKU: 2795011OPTIPOP-R Reel Cleaner
NTT-AT
ATC-RE-02 NTT-AT (SC, MU, SC2, LC, FC, ST)
- Efficient and easy to use
- Delivers consistently high quality cleaning performance
- Lightweight and safe to use
- Anti-static resin is used
Pigtail OM1 SC 2m TB 0.9mm, LSZH Orange
SKU: 2722024FO 103-S Series
103-S Series
1 Hole Fiber Optic Stripper
Compact, single-hole design for efficient fiber buffer coat stripping.
CFS-3 Series
3 Hole Fiber Optic Stripper
Compact, three-hole design for efficient stripping.
MSAT® 16 Series
16-Channel Mid-Span Fiber Access Tool
Designed to easily size and access fibers in loose tube cables ranging from
1 to 3 mm diameters in mid-span applications.
MB06 Series
Adjustable Slit & Ring Tool
Designed to perform slit and ring cuts on fiber optic cables, buffer tubes, and jackets from 0.05″ to 0.25″ (1.2 to 6.4 mm) in diameter.
€18.75
Select options
This product has multiple variants. The options may be chosen on the product page
PSI-15: QuickSleever™
- Conical fiber feed surface guides fiber directly to protection sleeve.
- Holds up to 15 protection sleeves.
- Sleeve is loaded and removed, another automatically falls into place.
- Compact and lightweight design.
- Remember to sleeve it before you cleave it!
- Please see our application note here detailing how to use this tool.
MS-316: Mid Span Slit & Ring Tool (2.9 mm-6.8 mm), Jonard
JONARD
- Consists of 5 precision slitting grooves and 5 precision ring grooves ranging in size from 2.9 mm to 6.8 mm
- One side of the tool performs radial/ring cuts and the other side slits the cable (longitudinal cut)
- Compact design weighing less only 74 g with included tethering hole makes it perfect to use in tight spaces or on the go
- Indicator line on top of the unit indicates the position of the blade for accurate slitting and ringing
- Replacement blade set available, part number: MS-316RB
- Blades last for 5,000 slits/cuts
Termination box 4xSC IP55
-
- Termination box for indoor/outdoor use, IP55.
- It is suitable for wall-mounting installation.
- Size: 210×135×40mm.
- The maximum capacity is 4 fibers.
- Frame for 4 SC simplex or LC duplex adapters.
COMPACT LOCATOR CL43-PB KIT
Locator CL43-PB Kit with rod probe SA05 (512Hz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
FW-50: Wet Wipes for Cleaning Fiber (Pack of 50)
JONARD
- Nonabrasive residue-free solvent cleans efficiently and evaporates quickly
- Compatible with most plastics, glass, and metals
- Contains (50) fiber wipes
Quantity
Quantity: 50
UC-4568: RJ11, RJ45 Regular and Feedthrough Connector Crimper Tool
JONARD
- Crimp and trim off excess conductors in one step
- Cleanly shears excess conductors flush against the connector
- Ratcheted, ultra-stable platform for consistent terminations with low hand force
- Tool includes built in jacket strippers for round and flat cables
- Precision-ground crimping dies crimp 2,4,6, and 8 position RJ11 and RJ45 regular and feedthrough type modular connectors
- Durable all-steel construction with heavy duty cutting blade good for 3,000 cuts
- Ergonomic cushion grip handles for greater comfort
Cable Tracer TM30
- Traces cables and wires, also live wires up to 400V
- Identifies wires and pairs and circuit breakers
- Monitors telecommunication lines
- Locates metal tubes and ducts
COMPACT LOCATOR CL43-PA
LOCATOR CL43-PA Kit with SA43 rod probe (33kHz and 10kHz)
- Affordable receiver especially for locating duct sondes
- Also compact wire and cable locator
- Supports 33kHz, 10kHz and 512Hz frequencies
- For outdoor and indoor use
CSR-1575: Cable Slit & Ring Tool, Jonard
JONARD
- The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter.
- The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.
JIC-125: Fiber Optic Stripper, Jonard
JONARD
- The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber.
- Preset at the factory so no adjustments are necessary.
- Unique design prevents nicks or scratches on the optical fiber plus blades are ground and hardened for long life. Yellow plastic dipped handles
CST-1900: Round Cable Stripper, Jonard
JONARD
- Jonard Round Cable Stripper for end stripping, midspan cuts, and circular for jacket removal
- Cuts non-armoured cable diameters 3/16″ to 1-1/8″ (4.5-29 mm)
JIC-375: Three Hole Fiber Optic Stripper, Jonard
JONARD
- Easy to use
- Safe to use
- Ergonomical and comfortable
MS-326: Micro Duct Fiber Cable Slit and Ring Tool, Jonard
JONARD
- Micro duct fiber cable slit and ring tool.
- MS-326 will also slit open thin wall buffer tubes.
- Consists of 5 precision slitting grooves and 5 ring grooves.
MDC-14: Micro Duct Tubing Cutter up to 14mm, Jonard
Jonard
- Cuts are clean and straight.
- Maximumduct diameter 14mm (9/16”).
- TPR (Thermoplastic Rubber) grips.
- Heat treated stainless steel blade.
Splice Protector Sleeve 61mm
Sold in complete packs of 100 pcs.
Sumitomo FC-6RS-C Cleaver
FC-6R series
Simple, Precise, Long life
- Newly launched FC-6R series with automatic blade rotation.
- The FC-6R series can make 60,000 cleaves. Manual blade rotation and blade height adjustment are not necessary.
- Fibre offcuts are automatically stored in the large capacity offcut collector.
- User selectable blade rotation.
Can be sold only to Estonia
Price range: €4.80 through €12.90
Select options
This product has multiple variants. The options may be chosen on the product page
Price range: €5.40 through €9.00
Select options
This product has multiple variants. The options may be chosen on the product page
Microduct Cutter LDK19501/03
HEXATRONIC
OPTIPOP-R Reel Cleaner
NTT-AT
ATC-RE-02 NTT-AT (SC, MU, SC2, LC, FC, ST)
- Efficient and easy to use
- Delivers consistently high quality cleaning performance
- Lightweight and safe to use
- Anti-static resin is used
Adapter spx SC-MM Ceramic
FIBEROPTICS24, SENKO
FO 103-S Series
103-S Series
1 Hole Fiber Optic Stripper
Compact, single-hole design for efficient fiber buffer coat stripping.
CFS-3 Series
3 Hole Fiber Optic Stripper
Compact, three-hole design for efficient stripping.
MSAT® 16 Series
16-Channel Mid-Span Fiber Access Tool
Designed to easily size and access fibers in loose tube cables ranging from
1 to 3 mm diameters in mid-span applications.
MB06 Series
Adjustable Slit & Ring Tool
Designed to perform slit and ring cuts on fiber optic cables, buffer tubes, and jackets from 0.05″ to 0.25″ (1.2 to 6.4 mm) in diameter.
Buffer Tube Scorers
One-step precision fiber buffer tube scoring tool.
€18.75
Select options
This product has multiple variants. The options may be chosen on the product page
Price range: €4.80 through €12.90
Patch OM3 dpx SC/LC FMS 2 SMT 2mm, LSZH Aqua, 1-15m
Select options
This product has multiple variants. The options may be chosen on the product page
Price range: €5.40 through €9.00
Patch SM dpx LC/LC FMS 2 SMT 2mm, LSZH Yellow, 1-15m
Select options
This product has multiple variants. The options may be chosen on the product page
€18.75
Buffer Tube Scorers
Select options
This product has multiple variants. The options may be chosen on the product page